Local · Family-run · Fully insured
Resin Bound Driveways in Somerset, Bristol & Devon
A resin bound driveway gives you a smooth, seamless, permeable surface that looks premium from day one and stays low-maintenance for years. We install resin bound properly - starting with the base underneath, not just the finish on top.
A great driveway starts underneath the surface: proper sub-base preparation, drainage and edge restraints before the finish goes down.
Why people choose it
- ✓ Smooth, seamless finish with no loose stones
- ✓ Permeable - rainwater drains through the surface rather than pooling
- ✓ Wide choice of natural aggregate colours and blends
- ✓ Weed-resistant when laid on a properly prepared base
- ✓ UV-stable resin available so the colour holds in sunlight
- ✓ Low maintenance - an occasional sweep and rinse keeps it looking new
Problems it solves
- → Cracked, sunken or tired concrete and tarmac drives
- → Gravel that scatters across the lawn and gets stuck in tyres
- → Puddles and standing water after heavy rain
- → Weeds pushing through joints in old paving
- → A dated frontage that lets the rest of the house down
What's included
When you compare quotes, check what's actually in them. Ours include the things that determine whether the job lasts:
- ✓ Honest assessment of your existing surface - overlay or full dig-out
- ✓ Full excavation and MOT Type 1 sub-base where required
- ✓ Permeable base build-up where appropriate for drainage compliance
- ✓ Solid edging restraint so the surface edge never crumbles
- ✓ ACO channels and drainage where water needs managing
- ✓ Recessed manhole covers for a clean, uninterrupted finish
- ✓ Resin and aggregate mixed to the correct ratios on site
- ✓ Hand-trowelled finish by an experienced installation team
- ✓ Full clean-up and clear aftercare guidance
How we install it
Assessment
We look at your existing surface, levels, drainage and access. If your current base is sound, an overlay may be possible; if not, we'll tell you straight that it needs a full dig-out - laying resin over a failing base is how driveways fail early.
Preparation
Excavation where needed, a compacted MOT Type 1 sub-base, and a suitable binder course (typically open-textured tarmac or concrete). This is the part you never see and the part that matters most.
Edging and drainage
Edging restraints are set to contain the surface, ACO channels are installed where water needs directing, and manhole covers are recessed so the finish flows over them.
Mixing and laying
Resin and aggregate are mixed on site to the correct ratios, laid at the correct depth and hand-trowelled to a smooth, even finish.
Curing and handover
The surface is protected while it cures - usually walkable within hours and ready for vehicles soon after. We leave the site clean and talk you through aftercare.
Ideal for
- • Driveways, paths, steps and patios of almost any shape
- • Overlays onto sound existing concrete or tarmac bases
- • Properties that need permeable, SuDS-friendly front gardens
- • Sloped drives - resin bound gives good grip when specified correctly
Options & finishes
- • A wide range of natural aggregate colours and blends
- • Contrasting borders and edge details
- • UV-stable resin for colour retention in exposed, sunny spots
- • Anti-slip additive for slopes and shaded, damp areas
Aftercare
- • Sweep occasionally and rinse with clean water
- • A light jet wash (fan nozzle, kept moving) once or twice a year
- • Treat oil spots promptly with warm soapy water
- • Avoid dragging skips, scaffold or sharp point loads across the surface
Resin Bound: your questions answered
Is resin bound permeable?
Yes - resin bound (as opposed to resin bonded) is porous, so rainwater drains through the surface into the base below. On a permeable base build-up it normally complies with front-garden planning rules without extra drainage. Where the base isn't permeable, we design in falls and ACO channels instead.
Can you lay resin over my existing driveway?
Sometimes. If your existing concrete or tarmac is sound, stable and at the right levels, an overlay can be a cost-effective option. If it's cracked, sunken or breaking up, overlaying just transfers those problems into your new surface - we'll always tell you honestly which applies.
Will the colour fade?
Standard resins can amber slightly in strong sunlight. Where colour matters - lighter blends, exposed south-facing drives - we specify UV-stable resin, which holds its colour far better. We'll recommend the right one for your job and explain the difference in cost.
Will weeds come through?
Not through a properly installed resin bound surface. Any occasional growth is surface-level - wind-blown seeds settling in dust - and sweeps or pulls away easily. It's nothing like weeds rooting up through block paving joints.
How long does installation take?
A typical overlay can be done in a day or two. A full dig-out with new sub-base usually takes around three to five days depending on size, access and drainage works. We'll give you a clear timescale with your written quote.
Can you quote from photos?
Yes - WhatsApp us a few photos and rough measurements on 07379 046388 and we'll give you a useful steer quickly. For an exact written quote we'll arrange a free site visit.
Resin resurfacing vs full resin driveway installation
Resin resurfacing, often called an overlay, can be the right route where the existing tarmac or concrete is stable, well drained and at a workable level. If the current drive is cracked, hollow, moving or holding water, a full installation with a rebuilt base is the better long-term specification.
For homeowners comparing resin driveways in Somerset, that difference matters most on flat or low-lying plots where drainage decides whether the finished surface performs properly.
Project proof and current work
Recent driveway projects across Somerset, Bristol and Devon are shown in the gallery and on our social pages. We only publish town-specific case studies when photos, broad location, specification details and customer permission are available.
Related services
- Resin Bound Patios →
- Block Paving Driveways →
- Drainage, Edging & Recessed Covers →
- Advice & guides →
- Project case studies →
Verified project
Where we install resin bound
Not sure if we cover your area? Send your postcode on WhatsApp for a quick coverage check.
Ready to talk about your resin bound project?
Proper groundwork, clean edges and a finish built to last. Free quotes, honest advice and a clear next step.
Not sure whether you need a full dig-out or an overlay? We'll talk you through it.
Free, no-obligation quote
Get a free resin bound quote
Short form, quick response, honest advice. Or WhatsApp photos to 07379 046388 for the fastest steer.
The short form asks what you're interested in, the rough size, what kind of job it is, then your contact details and postcode. It's free and there's no obligation - you can also WhatsApp us photos or simply call. We'll check the job properly before confirming anything in a written quote.
What happens next?
- We review your details and any photos.
- We call or WhatsApp if we need to check access, drainage or levels.
- We arrange a free visit where needed, then send a clear written quote.
Photos that help us quote faster
Send the front of the driveway or patio, a close-up of the current surface, and any drains, manhole covers, steps or tight access.
- ✓ Proper preparation, edging and drainage
- ✓ Local, family-run business
- ✓ Fully insured - residential and commercial
- ✓ Resin workmanship guarantees confirmed in writing where applicable
